| 
| ATLAS/CRAFTSMAN TYPE CROSS SLIDE (A-11).
This "T" cross slide equips Atlas/Craftsman 9, 10, and 12 inch lathes
for milling and line boring operations. The "T" slot mounting system on
1 5/8" centers is similar to that of the S-4382 cross slide, except that
instead of three "T" slots and tapped holes it has six "T" slots. The
dimensions of the drawing are those of the cross slide received "as cast."
Allow at least 1/16" machining allowance. While it is possible to use
the existing gib with the new cross slide, it is recommended that longer
gib be used to take advantage of the new full length "V" ways. Besides the iron casting, the kit for making the cross slide
includes two full size drawing sheets, one showing an adaptor for mounting
the topslide compound on the cross slide for turning operations. A milling
machine is required for machining the cross slide. Material for making the long gib plus nine 10-32 gib screws and jam nuts can be supplied with the S-4382 and A-11 cross slide kits for an additional $8.00, no additional shipping required if sent with kit.
Shipping wt. approx.
14 lbs.
$59.50 plus shipping
Drawing only $7.00
|
